|
Interface
|
WAN
|
1 x WAN port, 100/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
|
|
LAN
|
1 x LAN port, 100/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
|
|
SIM
|
1 Standard SIM card slot,1.8 V/3 V, external SIM holder
|
|
Antenna
|
2 x SMA for 4G, 1 x SMA for WiFi antenna connectors
|
|
LED
|
PWR, WAN, LAN, 2.4GHz, Data, Cellular, Signal
|
|
Reset
|
Reboot/Factory reset button
|
|
NETWORK
|
|
Routing
|
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6)
|
|
Network protocols
|
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, PPP, PPPoE, UPnP, DHCP, Telnet client, SNMP
|
|
Connection monitoring
|
Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
|
|
Firewall
|
Port forwarding
|
|
DHCP
|
Static and dynamic IP allocation
|
|
QoS
|
Traffic priority queuing by source/destination, service, protocol or port
|
|
DDNS
|
Supported >25 service providers, others can be configured manually
|
|
SECURITY
|
|
WEB filter
|
Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
|
|
Access control
|
Flexible access control of TCP, UDP, ICMP packets, MAC address filter
|
|
VPN
|
|
IPsec
|
IKEv1, IKEv2, supports up to 10 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
|
|
PPTP, L2TP
|
Client/Server services can run simultaneously
|
|
Serial transmission
|
|
TCP/UDP server
|
|
Parameters
|
Port, Baud rate, Parity, Data bits, Stop bits, Flow control
|
|
TCP/UDP client
|
|
Parameters
|
Port, Baud rate, Parity, Data bits, Stop bits, Flow control, Heartbeat
|
|
Data center
|
Supported 4 server run simultaneously
|
|
MONITORING & MANAGEMENT
|
|
WEB UI
|
HTTP, status, configuration, FW update,troubleshoot, event log, system log, kernel log
|
|
FOTA
|
Firmware update from sever, automatic notification
|
|
SNMP
|
SNMP (v1, v2, v3)
|
|
IoT PLATFORMS
|
|
Cloud of Things
|
Allows monitoring Network info, Availability
|
|
Configure
|
Configure parameters, Update firmware
|
|
SYSTEM CHARACTERISTICS
|
|
CPU
|
Mediatek MIPS 24Kc 580 MHz
|
|
RAM
|
128MB DDR3L
|
|
FLASH storage
|
16MB, SPI Flash
|
|
FIRMWARE / CONFIGURATION
|
|
WEB UI
|
Update FW from file, check FW on cloud, configuration backup and restore
|
|
FOTA
|
Update FW/configuration from cloud platform
|
|
RMS
|
Update FW/configuration for multiple devices
|
|
Keep settings
|
Update FW without losing current configuration
|
|
POWER
|
|
Connector
|
6-pin with 3.5 mm terminal block
|
|
Input voltage range
|
9 – 36 VDC, reverse polarity protection, surge protection
|
|
Power consumption
|
< 5 W Max
|
|
PHYSICAL SPECIFICATION
|
|
Casing material
|
Metal housing
|
|
Dimensions (W x H x D)
|
97*112*24mm
|
|
Weight
|
280g
|
|
OPERATING ENVIRONMENT
|
|
Operating temperature
|
-40 °C to 75 °C
|
|
Operating humidity
|
10% to 90% non-condensing
|
|
Ingress Protection Rating
|
IP30
|
|
REGULATORY & TYPE APPROVALS
|
|
Regulatory
|
CE, FCC, CCC
|
|
EMI IMMUNITY
|
|
Standards
|
Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-52 V1.1.0
FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014)
|
|
ESD
|
EN61000-4-2:2009
|
|
RS
|
EN 61000-4-3:2006 + A1:2008 + A2:2010
|
|
EFT
|
EN 61000-4-4:2012
|
|
Surge immunity (AC Power Line)
|
EN 61000-4-5:2006
|
|
Surge immunity (Ethernet ports)
|
EN 61000-4-5:2014, clause 7.1 of ITU-T K21
|
|
CS
|
EN 61000-4-6:2009
|
|
DIP
|
EN 61000-4-11:2004
|
|
RF
|
|
Standards
|
EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1
FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017)
RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1
AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017
|
|
Model
|
Region
|
LTE CAT4 (-C4)
|
LTE CAT1 (-C1)
|
|
R2100A
|
AT&T/ Verizon/ T-mobile, Canada
|
LTE-FDD: B2/B4/B5/B12/B13/B14/B66/B71;
WCDMA: B2/B4/B5
|
No
|
|
R2100C
|
China mainland
|
LTE-FDD: B1;
LTE-TDD: B38/B40/B41;
|
No
|
|
R2100E
|
EMEA/Korea/Thailand/India
|
LTE-FDD: B1/B3/B7/B8/B20/B28A
LTE-TDD: B38/B40/B41;
WCDMA: B1/B8 ;
GSM: B3/B8
|
LTE-FDD: B1/B3/B5/B7/B8/B20
WCDMA: B1/B5/B8;
GSM: B3/B8
|
|
R2100AU
|
Latin America/ANZ, Australia
|
LTE-FDD: B1/B2 /B3/B4/B5/B7/B8/B28;
LTE-TDD: B40
WCDMA: B1/B2/B5/B8;
GSM: B2/B3/B5/B8
|
LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28; LTE-FDD: B40
WCDMA: B1/B2/B5/B8;
GSM: B2/B3/B5/B8
|
|
R2100J
|
Japan
|
LTE-FDD: B1/B3/B8/B18/B19/B26;
LTE-TDD: B41;
WCDMA: B1/B6/B8/B19
|
No
|
|
R2100G
|
Global
|
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/ B19/B20/B25/B26/B28
LTE TDD: B38/B39/B40/B41
WCDMA: B1/B2/B4/B5/B6/B8/B19
|
No
|
Standard Package Includes:
* 1x R2100 4G Industrial Router
* 1x 12W PSU
* 1x Ethernet cable, 1m
* 2x 4G magnet antenna,1.5m cable
* 1x WiFi antenna
Note: All accessories can be customized.
|
